Step 1

To install the LAN utility OR driver, insert the CD ROM into the CD ROM device, and enter DRIVER>LAN>RTL8139C.  If your system is not equipped with a CD ROM device, copy the LAN driver from the CD ROM to a CF. diskette.  

Step 2

Execute install.exe file.  

Note: In the LAN directory, a  HELPME.EXE  file is included to provide installation information

Step 1

To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>SMI712.  If your system is not equipped with a CD ROM device, copy the VGA driver from the CD ROM to a CF.

Step 2

Execute  SETUP.EXE file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

There are two items for choice to setup.  Please choose the <Install VPM driver only> item notice the function key defined.  Pressing [Next] starts to install.

Step 5

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Step 6

In the WINDOWS98, you can find the <DISPLAYL> icon located in the {CONTROL PANEL} group.

Step 7

Adjust the <Refresh Rate>, <Cursor Animation>, <Font size>, <Resolution>, and <Big Cursor>

Note: If user uses Windows XP operation system, need the update Windows XP service pack2 is provide SMI712 VGA driver.

Step 1

Use the XFLASH.EXE program to update the BIOS setting.

Step 2

And then refer to the chapter “BIOS Setup”, as the steps to modify BIOS.  

Step 2

Now the CPU board’s BIOS loaded with are the newest program; user can use it to modify BIOS function in the future, when the BIOS add some functions.