Step 1

To install the LAN driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER>LAN>DMPDX3>XP. If your system is not equipped with a DVD ROM device, copy the LAN driver from the DVD ROM to a CF or USB flash driver. 

Step 2

Open Control Panel. [Start->Settings->Control Panel].  

Step 3

Click on System button> Select Hardware >click on Device Manager.  

Step 4

Click on Other Device > Ethernet Controller >Update Driver > Select Specify a location >Browse > Select “NETRDC” file from CF.  

Step 5

Click on OK >Next >Yes >Finish

Note: In the LAN > DMPDX3 > DOS >NDIS directory, provide NDIS device drive for DOS

Step 1

To install the VGA driver, insert the DVD ROM into the CD ROM device, and enter DRIVER>VGA>SMI712.  If your system is not equipped with a DVD ROM device, copy the VGA driver from the DVD ROM to a CF.

Step 2

Execute  SETUP.EXE file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Step 5

In the WINDOWS98, you can find the <DISPLAYL> icon located in the {CONTROL PANEL} group.

Step 6

Adjust the <Refresh Rate>, <Cursor Animation>, <Font size>, <Resolution>, and <Big Cursor>

Note: If user uses Windows XP operation system, need the update Windows XP service pack2 is provide SMI712 VGA driver.