FB2610

 
Install Driver

                SYSCHIP           LAN            VGA            AUDIO           Watch Dog            BIOS Update 


WIN98/2000/XP Driver

         Installs VIA Chipset, IRQ Routing, AGP Driver and PCI IDE Bus Master 4in 1Driver.

Step 1

To install the VIA 4 IN 1 driver, insert the CD ROM into the CD ROM device, and enter DRIVER>SysChip>VIA4in1.

Step 2

Execute VIAHyperion4in1xxxv.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

LAN        #TOP

Step 1

To install the LAN utility OR driver, insert the CD ROM into the CD ROM device, and enter DRIVER>LAN>RTL8139C.  If your system is not equipped with a CD ROM device, copy the LAN driver from the CD ROM to a 1.44” diskette.  

Step 2

Execute install.exe file.  

Note: In the LAN directory, a  HELPME.EXE  file is included to provide installation information

VGA       #TOP

            WINXP/WIN2000 Driver

Step 1

To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>VT8601T>WINXP_2K>Setup.

Step 2

Execute SETUP.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

 

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

 

Step 5

In the WINDOWSXP/2K, you can find the <DISPLAYL> icon located in the {CONTROL PANEL} group.

Step 6

Adjust the <Refresh Rate>,  <Font size> and <Resolution>.

 

Note: In the VGA>VT8601T, WINXP_2K directory, a Install.txt file is included to provide installation information

 
AUDIO        #TOP

          WIN98/NT/2000/XP Driver 

Step 1

To install the Audio driver in O.S. , insert the CD ROM into the CD ROM device, and enter DRIVER>Audio>VT686B. If your system is not equipped with a CD ROM device, copy the Audio driver from the CD ROM to CF.

Step 2

Execute the  SETUP.EXE  file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows. Yes, I want to restart my computer now. Installation is done! No, I will restart my computer later.

System must be restart then complete the installation.

 
Watch Dog        #TOP

      See MANUAL\M2610.PDF file, Chapter 5 Driver and Utility Watchdog Timer.

BIOS Update     #TOP

       See UTILITY\README.TXT file in subdirectory for BIOS update guidelines.