FB2702

Install Driver

　　　 SYSCHIP 　　 VGA 　　 AUDIO 　　 LAN 　　 TXE 　　 WatchDog 　　 BIOS Update 　

SYSCHIP　　#TOP

　　　WIN 7/8 Driver

　　　To Installs Intel Celeron J1900 Chipset, Core PCI, PCIe, SATA, USB, and IDE/ATA Device Drive.

	Step 01	To install the Celeron J1900 driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER>SysChip>E3845>WIN7 or >WIN8.

	Step 02	Execute SetupChipset.exe file.

	Step 03	The screen shows the SETUP type. Press any key to enter the main menu.

	Step 04	As the setup is completed, the system will generate the message as follows. Yes, I want to restart my computer now. Installation is done. No, I will restart my computer later. System must be restart then complete the installation.

VGA　　#TOP

　　　WIN 7/8 x86/x64 Driver

	Step 01	To install the VGA driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER>VGA>E3845 >WIN7> or >WIN8>.

	Step 02	Execute Setup.EXE file.

	Step 03	The screen shows the SETUP type. Press any key to enter the main menu.

	Step 04	As the setup is completed, the system will generate the message as follows. Yes, I want to restart my computer now. Installation is done. No, I will restart my computer later. System must be restart then complete the installation.

Note : In the DRIVER>VGA>E3845>WIN7 or >WIN8 directory, a Readme.txt file is included to provide installation information.

AUDIO　　#TOP

　　　WIN 7/8 x86/x64 Driver

	Step 01	To install the AUDIO driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER>AUDIO>ALC888_R270>Windows.

	Step 02	Execute Setup.exe file.

	Step 03	The screen shows the SETUP type. Press any key to enter the main menu.

	Step 04	As the setup is completed, the system will generate the message as follows. Yes, I want to restart my computer now. Installation is done! No, I will restart my computer later. System must be restart then complete the installation.

Note : After FB4706 is connected, you need to enter the BIOS CMOS SETUP to set the audio function and install the audio driver

LAN　　#TOP

　　　WIN 7/8 x86/x64 Driver

	Step 01	To install the LAN driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER>LAN>RTL8111F>WIN7.

	Step 02	Execute setup.exe file.

TXE　　#TOP

　　　WIN 7 Driver

	Step 01	To install the TXE driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER>TXE>E3845>WIN7 or >WIN8.

	Step 02	Execute SETUPTXE.exe file.

	Step 03	The screen shows the SETUP type. Press any key to enter the main menu.

	Step 04	As the setup is completed, the system will generate the message as follows. Read License Agreement and click “Yes” to proceed. Review Readme File Information and click “Next” to proceed. When the “Setup Progress” is complete click “Next” to proceed. Lastly, the “Setup Complete” screen appears so click “Finish” to restart your computer.

Note : In the DRIVER>TXE>E3845 >WIN7 or >WIN8 directory, a Readme.txt file is included to provide installation information. For Windows 7, it is necessary to install Windows update KB2685811 before installing TXE driver.

WatchDog　　#TOP

　　　See MANUAL\M2702.PDF file, Chapter 4 Software Installation Watchdog Timer.

BIOS Update　　#TOP

　　　See UTILITY\README.TXT file in subdirectory for BIOS update guidelines.