FB2730

 
Install Driver

                SYSCHIP           LAN            VGA            AUDIO            USB           TXE          Watch Dog            BIOS Update 


WIN 7/8 Driver        

Installs Atom E3845 Chipset, Core PCI, PCIe, SATA, USB, ISAPnP and IDE/ATA Device Drive.

Step 1

To install the Atom E3845 driver, insert the CD ROM into the CD ROM device, and enter DRIVER>SysChip>E3845>WIN7 or >WIN8. 

Step 2

Execute SetupChipset.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

LAN        #TOP

            WIN 7 Driver X86/X64 Driver

Step 1

To install the LAN driver, insert the CD ROM into the CD ROM device, and enter DRIVER>LAN>RTL 8111F >WIN7. If your system is not equipped with a CD ROM device, copy the LAN driver from the CD ROM to CF.

Step 2

Execute Setup.exe file.

 

VGA       #TOP

WIN 7/8 x86/x64 Driver

Step 1

To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>E3845 >WIN7> or >WIN8>.

Step 2

Execute Setup.EXE  file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Note: In the DRIVER>VGA>E3845>WIN7 or >WIN8 directory, a Readme.txt file is included to provide installation information.

AUDIO       #TOP

 WIN 7/8 X86/X64 Driver 

Step 1

To install the AUDIO driver, insert the CD ROM into the CD ROM device, and enter DRIVER>AUDIO>ALC888_R270>Windows.

Step 2

Execute Setup.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.  Yes, I want to restart my computer now. Installation is done!No, I will restart my computer later.

System must be restart then complete the installation.

 

USB       #TOP

 WIN 7 X86/X64 Driver 

Step 1

To install the USB 3.0 XHCI driver, insert the CD ROM into the CD ROM device, and enter DRIVER>USB>E3845>WIN7.

Step 2

Execute SETUP.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Read License Agreement and click “Yes” to proceed. Review Readme File Information and click “Next” to proceed.

When the “Setup Progress” is complete click “Next” to proceed. Lastly, the “Setup Complete” screen appears so click “Finish” to

 restart your computer.

 

Note:  In the DRIVER> USB>E3845 >WIN7 directory, a Readme.txt file is included to provide installation information.

 

TXE       #TOP

WIN7 X86/X64 Driver

Step 1

To install the TXE driver, insert the CD ROM into the CD ROM device, and enter DRIVER>TXE>E3845>WIN7 or >WIN8.

Step 2

Execute SETUPTXE.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Read License Agreement and click “Yes” to proceed. Review Readme File Information and click “Next” to proceed.

When the “Setup Progress” is complete click “Next” to proceed. Lastly, the “Setup Complete” screen appears so click “Finish” to

 restart   your computer.  

Note: In the DRIVER>TXE>E3845 >WIN7 or >WIN8 directory, a Readme.txt file is included to provide installation information. For Windows 7, it is necessary to install Windows update KB2685811 before installing TXE driver

 

Watch Dog        #TOP

       See MANUAL\M2730.PDF file, Chapter 4 Software Installation Watchdog Timer.

 

BIOS Update     #TOP

       See UTILITY\README.TXT file in subdirectory for BIOS update guidelines.