Step 1

To install the Atom E3845 driver, insert the CD ROM into the CD ROM device, and enter DRIVER>SysChip>E3845>WIN7 or >WIN8. 

Step 2

Execute SetupChipset.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Step 1

To install the LAN driver, insert the CD ROM into the CD ROM device, and enter DRIVER>LAN>RTL 8111F >WIN7. If your system is not equipped with a CD ROM device, copy the LAN driver from the CD ROM to CF.

Step 2

Execute setup.exe file.

Step 1

To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>E3845 >WIN7> or >WIN8>.

Step 2

Execute Setup.EXE  file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Note: In the DRIVER>VGA>E3845>WIN7 or >WIN8 directory, a Readme.txt file is included to provide installation information.

Step 1

To install the AUDIO driver, insert the CD ROM into the CD ROM device, and enter DRIVER>AUDIO>ALC888_R270>Windows.

Step 2

Execute Setup.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Step 1

To install the USB 3.0 XHCI driver, insert the CD ROM into the CD ROM device, and enter DRIVER>USB>E3845>WIN7.

Step 2

Execute SETUP.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Read License Agreement and click “Yes” to proceed.

Review Readme File Information and click “Next” to proceed.

When the “Setup Progress” is complete click “Next” to proceed.

Lastly, the “Setup Complete” screen appears so click “Finish” to restart

your computer.  

Note:  In the DRIVER> USB>E3845 >WIN7 directory, a Readme.txt file is included to provide installation information.

Step 1

To install the TXE driver, insert the CD ROM into the CD ROM device, and enter DRIVER>TXE>E3845>WIN7 or >WIN8.

Step 2

Execute SETUPTXE.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Read License Agreement and click “Yes” to proceed.

Review Readme File Information and click “Next” to proceed.

When the “Setup Progress” is complete click “Next” to proceed.

Lastly, the “Setup Complete” screen appears so click “Finish” to restart

your computer.  

Note: In the DRIVER>TXE>E3845 >WIN7 or >WIN8 directory, a Readme.txt file is included to provide installation information. For Windows 7, it is necessary to install Windows update KB2685811 before installing TXE driver.

Step 1

To install the Touch Screen driver, insert the CD ROM into the CD ROM device, and enter DRIVER>TouchScreen>PM6500>USB_RS232>Windows.

Step 2

Execute Setup.exe file. Just click [Next >] button to continue installation.

Step 3

Windows will prompt a message before driver install. A License Agreement window appears. Click "I Agree" and "Next"

Step 4

When ready to install the driver. Click “Install”.

Step 5

When the window below shows up, please select “yes” for installing PenMount as mouse mode; select “no” for digitizer mode. If your operating system doesn’t support Windows tablet input, digitizer device can’t be used, therefore you have to select “yes” here, otherwise after the installation the touch doesn’t work after re-booting. 

Step 6

A Windows Notifying of installation completion appears. Click “Finish”.

Step 7

Users can check the situation of controllers in Device Manager. If the controller is set up well, there will be messages as the following picture.

Step 8

As soon as driver installation finishes, the icon of PenMount monitor.