Step 1

To install the system driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER> SysChip> Apollolake> SYS.

Step 2

Execute SetupChipset.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!
No, I will restart my computer later.
System must be restart then complete the installation.

Step 1

To install the ISH_BUS driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER> SysChip> Apollolake> ISH.

Step 2

Execute SetupISS.exe.

Step 1

To install the Serial IO driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER> SysChip > Apollolake > Serial_IO >X64.

Step 2

Execute SetupSerialIO.EXE file.

Note: In the DRIVER> SysChip> Apollolake> Serial_IO>X64 directory, a Readme.txt file is included to provide installation information.

Step 1

To install the TXE driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER>TXE> Apollolake.

Step 2

Execute SETUPTXE.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Read License Agreement and click “Yes” to proceed.
Review Readme File Information and click “Next” to proceed.

When the “Setup Progress” is complete click “Next” to proceed.
Lastly, the “Setup Complete” screen appears so click “Finish” to restart   your computer.

Step 1

To install the LAN driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER>LAN>RTL8111H>WIN10.

Step 2

Execute setup.exe file.

Step 1

To install the VGA driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER>VGA>Apollolake.

Step 2

Execute Installer.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!
No, I will restart my computer later.
System must be restart then complete the installation.

Note: In the DRIVER>VGA>Apollolake directory, a Readme_xxx.txt & Install_xxx.txt file is included to provide installation information. This driver support WIN10* RS5(1809) ~ WIN10*(21H2) & WIN11* Family.

Step 1

To install the AUDIO driver, insert the DVD ROM into the DVD ROM device, and enter DRIVER>AUDIO>ALC888_R270>Windows.

Step 2

Execute Setup.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!
No, I will restart my computer later.
System must be restart then complete the installation