FX5327

Install Driver

　　　 SYSCHIP 　　 VGA 　　 AUDIO 　　 LAN 　　 USB 　　 TXE 　　 GPIO 　　 CANBUS 　　 WatchDog 　　 BIOS Update 　

SYSCHIP　　#TOP

　　　WIN 7/8.1/10 -32/-64 Driver　　　

	Step 01	To install the Braswell driver, insert the CD ROM into the CD ROM device, and enter DRIVER>SysChip>Braswell>.

	Step 02	Execute SetupChipset.exe file.

	Step 03	The screen shows the SETUP type. Press any key to enter the main menu.

	Step 04	As the setup is completed, the system will generate the message as follows. Yes, I want to restart my computer now. Installation is done! No, I will restart my computer later. System must be restart then complete the installation.

VGA　　#TOP

　　　WIN 7/8.1/10 -32/-64 Driver

	Step 01	To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>Braswell>WIN32> or >WIN64>.

	Step 02	Execute Setup.EXE file.

	Step 03	The screen shows the SETUP type. Press any key to enter the main menu.

	Step 04	As the setup is completed, the system will generate the message as follows. Yes, I want to restart my computer now. Installation is done! No, I will restart my computer later. System must be restart then complete the installation.

Note : In the DRIVER>VGA>Braswell>WIN32 or >WIN64 directory, a Readme.txt file is included to provide installation information.

AUDIO　　#TOP

　　　WIN 7/8.1/10 X86/X64 Driver

	Step 01	To install the AUDIO driver, insert the CD ROM into the CD ROM device, and enter DRIVER>AUDIO>ALC888_R270>Windows.

	Step 02	Execute Setup.exe file.

	Step 03	The screen shows the SETUP type. Press any key to enter the main menu.

	Step 04	As the setup is completed, the system will generate the message as follows. Yes, I want to restart my computer now. Installation is done! No, I will restart my computer later. System must be restart then complete the installation.

LAN　　#TOP

　　　WIN 7 Driver X86/X64 Driver

	Step 01	To install the LAN driver, insert the CD ROM into the CD ROM device, and enter DRIVER>LAN>RTL8111F>WIN7. If your system is not equipped with a CD ROM device, copy the LAN driver from the CD ROM to CF.

	Step 02	Execute setup.exe file.

USB　　#TOP

　　　WIN 7 X86/X64 Driver

	The ECHI Controller is removed from IntelR Pentium/CeleronR Processor N3000 Family. This may affect Windows7 installation using USB media as Windows7 doesn’t have a native support xHCI driver.

	(https://downloadcenter.intel.com/download/25476/Windows-7-USB-3-0-Creator-Util-ity)

Note : In the DRIVER> USB>Braswell >WIN7 directory, a win7-usb3.0-creator-readme-v3.pdf file is included to provide installation WIN7 image information.

TXE　　#TOP

　　　WIN 7/8.1/10 X86/X64 Driver

	Step 01	To install the TXE driver, insert the CD ROM into the CD ROM device, and enter DRIVER>TXE>Braswell>.

	Step 02	Execute SETUPTXE.exe file.

	Step 03	The screen shows the SETUP type. Press any key to enter the main menu.

	Step 04	As the setup is completed, the system will generate the message as follows. Read License Agreement and click “Yes” to proceed. Review Readme File Information and click “Next” to proceed. When the “Setup Progress” is complete click “Next” to proceed. Lastly, the “Setup Complete” screen appears so click “Finish” to restart your computer.

GPIO　　#TOP

Note : In the GPIO/Braswell directory, README.TXT file is included to provide demo program information.

CANBUS　　#TOP

Note : In the DRIVER/CANBUS/SJA1000 directory a demo file is included to provide CAN control information and Turbo-C DEMO program. And Please see “SJA1000.pdf” on your CD-ROM for further information on the SJA1000 chip.

WatchDog　　#TOP

　　　See MANUAL\M5327.PDF file, Chapter 4 Software Installation Watchdog Timer.

BIOS Update　　#TOP

　　　See UTILITY\README.TXT file in subdirectory for BIOS update guidelines.