FX5405
Install Driver |
SYSCHIP LAN VGA AUDIO USB CANBUS Watch Dog BIOS Update
WIN98/2000/XP Driver
Installs 852GME Chipset, IRQ Routing, USB, AGP Driver and PCI IDE Bus Master Driver.
Step 1 |
To install the 852GME driver, insert the CD ROM into the CD ROM device, and enter DRIVER>SysChip>855GME. |
Step 2 |
Execute Setup.exe file. |
Step 3 |
The screen shows the SETUP type. Press any key to enter the main menu. |
Step 4 |
As the setup is completed, the system will generate the message as follows. Yes, I want to restart my computer now. Installation is done! No, I will restart my computer later. System must be restart then complete the installation.
|
Note:In the Syschip>855GME directory, a Readme.txt file is included to provide installation information. |
LAN #TOP |
Step 1 |
To install the LAN utility OR driver, insert the CD ROM into the CD ROM device, and enter DRIVER>82562ET and DRIVER > LAN >RTL8110SX >DIAG.. If your system is not equipped with a CD ROM device, copy the LAN driver from the CD ROM to CF. |
|
Execute Pro2kxp.exe and install2KXP.exe file.
|
Note: In the LAN>82562ET and LAN>RTL8110SX directory, a README.TXT is included to provide installation information. |
VGA #TOP |
WIN98SE/ME/2000/XP/NT4.0 Driver
Step 1 |
To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>855GME>WIN2K_XP, WIN98_ME or WINNT4. |
Step 2 |
Execute SETUP.EXE file. |
Step 3 |
The screen shows the SETUP type. Press any key to enter the main menu. |
Step 4 |
As the setup is completed, the system will generate the message as follows. Yes, I want to restart my computer now. Installation is done! No, I will restart my computer later. System must be restart then complete the installation. |
Step 5 |
In the WINDOWS2000/XP/98SE/ME, you can find the <DISPLAYL> icon located in the {CONTROL PANEL} group. |
Step 6 |
Adjust the <Refresh Rate>, <Font size> and <Resolution>.
|
AUDIO #TOP |
WIN98/2000/XP Driver
Step 1 |
To install the AUDIO driver, insert the CD ROM into the CD ROM device, and enter DRIVER>AUDIO>I815E>WIN98&me&2K&XP. |
Step 2 |
Execute SETUP.EXE file. |
Step 3 |
The screen shows the SETUP type. Press any key to enter the main menu. |
Step 4 |
As the setup is completed, the system will generate the message as follows. Yes, I want to restart my computer now. Installation is done! No, I will restart my computer later. System must be restart then complete the installation.
|
Note:In the DRIVER>AUDIO>I815E> WIN98&ME&2K&XP or WINNT40 directory, a Readme.txt file is included to provide installation information. |
USB2.0 #TOP |
WIN98 Driver
Step 1 |
To install the USB driver, insert the CD ROM into the CD ROM device, and enter DRIVER>USB>855GME>WIN2K, WINXP, WIN98_ME. |
Step 2 |
Start the "Add New Hardware" wizard in control panel (Click Start/Settings/Control Panel). |
Step 3 |
Select “Hardware” and click “Device Manager ” button. |
Step 4 |
Double Click “USB Root Hub”. |
Step 5 |
Select “Driver”. |
Step 6 |
Click “Install” to install the driver. |
Step 7 |
Follow the instructions on the screen to complete the installation. |
Step 8 |
Click “Finish” after the driver installation is complete. |
CANBUS #TOP |
In the DRIVER/CANBUS/SJA1000 directory a demo file is included to provide CAN control information and Turbo-C
DEMO program. And Please see “SJA1000.pdf” on your CD-ROM for further information on the SJA1000 chip.
Watch Dog #TOP |
See MANUAL\M5405.PDF file, Chapter 4 Software Installation Watchdog Timer.
BIOS Update #TOP |
See UTILITY\README.TXT file in subdirectory for BIOS update guidelines.