Step 1

To install the VIA 4 IN 1 driver, insert the CD ROM into the CD ROM device, and enter DRIVER>SysChip>VIA4in1.

Step 2

Execute VIAHyperion4in1xxxv.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Step 1

To install the LAN utility OR driver, insert the CD ROM into the CD ROM device, and enter DRIVER>LAN>RTL8139C.  If your system is not equipped with a CD ROM device, copy the LAN driver from the CD ROM to CF.  

Step 2

Execute install.exe file.  

Note: In the LAN directory, a  HELPME.EXE  file is included to provide installation information

Step 1

To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>VIA8606>WIN98_ME. 

Step 2

Open the Control Panel and double-click “SYSTEM” icon and then Click the “DEVICE Manager” Tab and double click “VGA Display”.

Step 3

Click on DRIVE from the menu bar and new screen appears with the “Update Driver” button and then system will search VGA drive file starting form           CD ROM device.

Step 4

As the installation is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Step 5

In the WINDOWS98/ME, you can find the <DISPLAYL> icon located in the {CONTROL PANEL} group.

Step 6

Adjust the <Refresh Rate>,  <Font size> and <Resolution>.

Note: In the VGA>VIA8606>NT40, WINXP_2K directory, a Install.txt file is included to provide installation information

Step 1

To install the Audio driver in O.S. , insert the CD ROM into the CD ROM device, and enter DRIVER>Audio>VT686B. If your system is not equipped with a CD ROM device, copy the Audio driver from the CD ROM to CF.

Step 2

In the VT686B execute the  SETUP.EXE  file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!
No, I will restart my computer later.

System must be restart then complete the installation.