Step 1

To install the 852GME driver, insert the CD ROM into the CD ROM device, and enter DRIVER>SysChip>855GME.

Step 2

Execute Setup.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Note:In the Syschip>855GME directory, a Readme.txt file is included to provide installation information.

Step 1

To install the LAN utility OR driver, insert the CD ROM into the CD ROM device, and enter DRIVER>LAN>RTL8139C>DIAG. If your system is not equipped with a CD ROM device, copy the LAN driver from the CD ROM to CF.

Step 2

Execute setup.exe file.

Note:In the  LAN directory, a HELPME.EXE is included to provide installation information

Step 1

To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>855GME>WIN2K_XP, WIN98_ME or WINNT4. 

Step 2

Execute SETUP.EXE file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Step 5

In the WINDOWS2000/XP/98SE/ME, you can find the <DISPLAYL> icon located in the {CONTROL PANEL} group.

Step 6

Adjust the <Refresh Rate>,  <Font size> and <Resolution>.

Step 1

To install the AUDIO driver, insert the CD ROM into the CD ROM device, and enter DRIVER>AUDIO>ALC655>WIN2K&XP.

Step 2

Execute wdm_xxx.exe file.

Step 3

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Step 1

To install the USB driver, insert the CD ROM into the CD ROM device, and enter DRIVER>USB>855GME>WIN2K, WINXP, WIN98_ME. 

Step 2

Start the "Add New Hardware" wizard in control panel

Step 3

Select “Hardware” and click “Device Manager ” button.

Step 4

Double Click “USB Root Hub”.

Step 5

Select “Driver”.

Step 6

Click “Install” to install the driver.

Step 7

Follow the instructions on the screen to complete the installation.

Step 8

Click “Finish” after the driver installation is complete.