Step 1

To install the VIA 4 IN 1 driver, insert the CD ROM into the CD ROM device, and enter DRIVER>SysChip>VIA4in1. If your system is not equipped with a CD ROM device, copy the VIA 4 IN 1 driver from the CD ROM to CF or USB Device.

Step 2

Execute VIAHyperion4in1xxxv.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Step 1

To install the LAN utility or driver, insert the CD ROM into the CD ROM device, and enter DRIVER>LAN>RTL8139C or DRIVER>LAN>RTL8110SX.  If your system is not equipped with a CD ROM device, copy the LAN driver from the CD ROM to CF.  

Step 2

Execute install.exe file/ Setup.exe file.  

Note: In the LAN directory, a  HELPME.EXE  or SETUP.TXT file is included to provide installation information

Step 1

To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>VT8601T>WINXP_2K>Setup. If your system is not equipped with a CD ROM device, copy the VGA driver from the CD ROM to CF. 

Step 2

Execute SETUP.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

Step 5

In the WINDOWSXP/2K, you can find the <DISPLAYL> icon located in the {CONTROL PANEL} group.

Step 6

Adjust the <Resolution> and <Color>.

Note: In the VGA>VT8601T, WINXP_2K directory, a Install.txt file is included to provide installation information