FR9100

@
Install Driver

                SYSCHIP           LAN            VGA           IDE              Watch Dog            BIOS Update 


Windows XP/2003/S2008/7-X32 /x64 System Driver        

          Installs ICH9M Chipset, Core PCI, PCIe, SATA, USB, ISAPnP and IDE/ATA Device Drive.

Step 1

To install the GM45 driver, insert the CD ROM into the CD ROM device, and enter DRIVER>SysChip>ICH9M.

Step 2

Execute Setup.exe file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

 

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

     

LAN        #TOP

Windows XP/S2003/S2008/7-X32/X64 LAN Driver        

Step 1

To install the LAN utility OR driver, insert the CD ROM into the CD ROM device, and enter DRIVER>LAN>W82574L>Windows. If your system is not equipped with a CD ROM device, copy the LAN driver from the CD ROM to CF.

Step 2

Execute PROWIN32.exe or PROWIN64.exe file.

@

VGA       #TOP

 WIN XP/Vista/7-X32/X64 VGA Driver 

Step 1

To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>GM45. 

Step 2

Execute SETUP.EXE file.

Step 3

The screen shows the SETUP type. Press any key to enter the main menu.

Step 4

As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!

No, I will restart my computer later.

System must be restart then complete the installation.

 

Step 5

In the WINDOWS2000/XP/VISAT, you can find the <DISPLAYL> icon located in the {CONTROL PANEL} group.

Step 6

Adjust the <Refresh Rate>, <Font size> and <Resolution>.

Note:When install VGA driver on Windows XP of system before need the install Microsoft.net 3.0 Framework.

@

@

AHCH & RAID        #TOP

 Windows XP-SP3/S2003/S2008/7-X32/X64 AHCI&RAID Driver 

Step 1

To install the RAID utility OR AHCI driver, insert the CD ROM into the CD ROM device, and enter DRIVER>IDE>RST.  If your  system is not equipped with a CD ROM device, copy the AHCI&RAID driver from the CD ROM to CF.

Step 2

Execute IATA_CD.exe file.

Note: 
1. If your install Windows XP is early version (SP1/SP2), copy the AHCI driver from the CD ROM to Floppy Disk and insert to USB floppy device. In the IDE > AHCI AHCI>F6_RST directory, a README.TXT is included to provide installation and setup RAID Option ROM information.
2. When BIOS CMOS setting SATA as AHCI or RAID mode, need the install the AHCI & RAID device driver.

@

@

Watch Dog        #TOP

       See MANUAL\M9100.PDF file, Chapter 4 Software Installation Watchdog Timer.

@

BIOS Update     #TOP

       See UTILITY\README.TXT file in subdirectory for BIOS update guidelines.

@